Hermle Z216M Unrefrigerated and Z216MK Refrigerated Microcentrifuges

Zoom Out Zoom In

Hermle Z216M Unrefrigerated and Z216MK Refrigerated Microcentrifuges

 

Be the first to review this product

Additional Information

Technical Data:
> Max. speed: 15,000 rpm.
> Max. RCF: 21,380 x g.
> Max. volume: 44 x 1.5/2.0ml. tubes
> Temperature range: -20°C to +40°C in 1°C increments
> Speed range: 200 – 15,000rpm.
> Running times: 59 min. 50 sec. / 10 sec. increments;  99 hour 59 min. / 1 min. increments; continuous running
> Dimensions: Z216M – 280W x 390D x 290H mm.;  Z216MK - 280W x 550D x 290H mm.
> Weight: Z216M – 17 kg.; Z216MK – 35 kg.
> Power consumption: Z216M – 280W; Z216MK - 500W

Specifications:
> Maintenance-free induction drive
> Microprocessor with large LCD display
> Motor driven lid lock
> Active imbalance identification and cut-off
> Standstill cooling; fast cooling to 4°C in less than 10 minutes (Z216MK only)
> Audible signal at the end of each run
> Rapid acceleration and deceleration (see rotor data)
> Lowest sample temperature 4°C at 20,000 x g. (Z216MK only)
> Extremely compact with a space saving footprint
> Quick access to samples with a snap-on rotor lid
> Aerosol-tight rotor option
> Manufactured according to international safety standard IEC 1010
> Distinct control panel:
- simple one handed operation
- easy to programme with gloves on
- full keyboard
- permanent indication of preset and actual values
- selection of speed in both rpm. and g-force, with increments of 10
- ‘Quick’ key for short run
- 10 acceleration and deceleration rates
- storage of up to 99 runs
- temperature range from -20°C to +40°C (Z216MK only)
- input and indication of temperature either in °C or °F (Z216MK only)
- pre-cooling programme; pre-cooling time from room temperature to +4°C < 10 minutes (Z216MK only)
- pre-selection of the running time from 10 seconds to 99 hours 59 minutes or continuous

Ordering Information:

325.00 V01 Hermle Z216M Unrefrigerated Microcentrifuge
325.00 P01 Hermle Z216M Unrefrigerated Microcentrifuge supplied with angle rotor 220.87 V11 for 24 x 1.5ml. (2.0ml.) tubes
305.00 V05 Hermle Z216MK Refrigerated Microcentrifuge
305.00 P05 Hermle Z216MK Refrigerated Microcentrifuge supplied with angle rotor 220.87 V14 for 24 x 1.5ml. (2.0ml.) tubes

Optional Rotors:

220.87 V14 Angle rotor 24 x 1.5/2.0ml. tubes Max. speed / RCF: 15,000 rpm. / 21,380 x g
220.87 V13 Angle rotor 24 x 1.5/2.0ml. tubes, hermetically sealable
Max. speed / RCF: 15,000 rpm. / 21,380 x g
221.17 V06 Angle rotor 30 x 1.5/2.0ml. tubes, hermetically sealable
Max. speed / RCF: 13,500 rpm. / 19,150 x g
220.88 V08 Angle rotor 44 x 1.5/2.0ml. tubes, Max. speed / RCF: 13,500 rpm. / 18,400 x g

Adaptors for 220.87 V14, 220.87 V13, 221.17 V06 and 220.88 V08 rotors:

704.004 Adaptor set for 0.2 – 0.4ml. tubes, 6 mm. dia. (pack of 6)
704.005 Adaptor set for 0.5ml. tubes, 8 mm. dia. (pack of 6)
220.92 V07 Angle rotor 64 x 0.4ml. tubes, Max. speed / RCF: 13,500 rpm. / 17,960 x g
221.38 V03 Angle rotor 4 x 8 place PCR strips, Max. speed / RCF: 15,000 rpm. / 15,342 x g
221.35 V03 Angle rotor 12 x 5ml. Reaction tubes Max. speed 14,500 rpm (19,980 x g.); rotor angle 45º
701.015 Adaptor for 1.5/2.0ml. tube, 11 mm. dia. (pack of 6)
701.016 Adaptor for 1.0ml. Cryo tube, 12.6 mm. dia. (pack of 6)
701.017 Adaptor for 1.8ml. Cryo tube, 12.6 mm. dia. (pack of 6).
220.58 V13 Haematocrit rotor for 24 capillaries for Z216M only! Max. speed / RCF: 12,000 rpm / 14,811 x g
620.001 Graph for determining the haematocrit value outside the rotor
620.002 Reading device for determining the haematocrit value outside the centrifuge