N-Biotek CO2 Incubators

Zoom Out Zoom In

N-Biotek CO2 Incubators

 

Be the first to review this product


Please note that this product is not available online. For more information on purchasing this item, please contact our sales office on the number below:


+44 020 8542 2283


or email scientific@zeal.co.uk

Additional Information

- 6 Sides Direct Heating System
Electric heating wire is covered on all sides of the chamber which provides stable uniformity, fast heat-up and fast temperature recovery. Three parts of heating section are controlled and calibrated individually by three temperature sensors.

- Dry Wall and Air Jacket
Warm air from heating jacket is preserved in space between chamber and insulation. It helps the temperature recover faster and minimises heat loss. Dry wall with insulation does not require regular maintenance.

- Dual Beam Infrared (IR) C02 Sensor
Fast and precise detection for C02 gas regardless of temperature and humidity.

- Natural Humidification using Water Tray
The heater on the bottom side of the cabinet warms the water in the tray to provide humidification. The circulation fan delivers the moisture formed from the water tray around the entire chamber.

- No Condensation
Heating by front door heater and frame heater prevent condensation in the chamber and on the glass door.

- Microprocessor PID Control
Intelligent Control for CO2 density, temperature, alarm and automatic decontamination (optional)

- HEPA Filtration of Gas Supply Inlets

- Perforated Shelves are good for natural air flows and stainless steel is resistant against rust and contamination.

- Rounded Corners
allow easy cleaning and entire chamber is crevice-free

- Alarm System
Buzzer to alarm low or high deviation of C02 and temperature.

- Over Heating Limit
Heating is automatically cut off by safety device when temperature control failed or excessive heating over set point.

- 2 Sizes
42 and 179 litre

Options:

- Sterilisation Options
1. UV Sterilisation: 30W UV light is placed on the chamber ceiling next to the circulation fan. The UV light
    does not reach the samples and sterilisation can be operated during culturing.
2. 125ºC Hot Air Sterilisation: Automatic 8 hours sterilisation process (5 hours for sterilisation and 3 hours
     for re-set at 37ºC, 5% CO2).
 
- Multi Gas Control: Multi gas supply (N2 and O2) is available for all CO2 incubators but model NB-203 is recommended due to high gas consumption when performing Hypoxia or Hyproxia.

- Cooling Control: Peltier cooling is applicable in models NB-203 and NB-203XL, 5ºC below room temperature but maximum lowest temperature is +15ºC.

- Copper Chamber: N-Biotek can customise the incubators with oxidising copper / copper-plated chamber for enhanced contamination protection.

- Monitoring System: Using internet network, the monitoring system has been designed to observe the status of the incubator even remotely

- Split Inner Door: Benefits of split inner glass doors are lower gas consumption, lower heat loss, fast recovery and easy separation for various samples. 5 door for NB-203 and 6 door for NB-203XL.

- Access port: For use of additional equipment in the incubator.

- Models with built-in rollers or orbital shaker

 
Specifications:

Temperature 
 NB-203 
 NB-203XL 
Range:  Ambient +5°C to 60°C  Ambient +5°C to 60°C 
Accuracy (LED):   ±0.1°c at 37°C
±0.1ºc at 37ºC
Increment 0.1°C 0.1°C 
Control Microprocessor digital PID control   Microprocessor digital PID control  
CO2    
Range: 0% to 20% 0% to 20% 
Accuracy (LED): Increment:   ± 0.1% at 5% at 37°C ± 0.1% at 5% at 370C  
Increment:  0.1%  0.1%
Sensor: IR CO2 sensor  IR CO2 sensor
Control:  Microprocessor  Microprocessor
Inlet pressure:   0.1 MPA  0.1 MPA 
Door     
Outer door:  Silicon packing magnetic door  Silicon packing magnetic door  
Inner door:  Tempered glass door  Tempered glass door 
Operating panel:  Individual 2 channel touch button    Individual 2 channel touch button 
Display:  5 digit LED x 2  5 digit LED x 2 
Jacket type:  Dry wall type (6 sides heat)   Dry wall type (6 sides heat)  
Chamber material:   Stainless steel (304)  Stainless steel (304) 
Chamber volume:   42 litre  179 litre 
Number of shelves:   2 each (max. shelves 4 each)   3 each (max. shelves Beach)  
Chamber dimensions:   320W x 350D x 370H mm.   473W x 528D x 710H mm.  
Overall dimensions:   408W x 482D x 550H mm.  560W x 665D x 945H mm.  
Weight:  35 kg.  78 kg. 
Electrical:  110/220V,50/60Hz 110/220V, 50/60Hz 
 
 Options specifications:
 
U.V.Sterilisation 
Wavelength: 400 - 450 nm. 
Power:
 40W(1 lamp each) 
Hot Air Sterilisation
Temperature
Range: 125°C / 8 hours (5 hours for sterilisation and 3 hours for re-set to set points)
Control: Microprocessor digital PID control 
O2 Control
Range:  1 – 19% or 20 – 100%
Sensor: Galvanic
 
 Ordering information:
 
Cat. Number  Description 

 

NB-203 NB-203 CO2 Incubator, 42 litre, IR CO2 sensor    
NB-203C NB-203C CO2 Incubator,42 litre, IR CO2 sensor, Peltier Cooling (5°C below room temperature to +60°C)    
NB-203XL NB-203XL CO2 Incubator, 179 litre, IR CO2 sensor   
NB-203QS  NB-203QS CO2 Incubator, 179 litre, IR CO2 sensor,
with built-in orbital shaker (accessories below) 
 
NB-203QR NB-203QR CO2 Incubator, 179 litre, IR CO2 sensor,
with built-in rollers for 4 bottles (2 levels) 
 

Additional Options:

203-ING 5 divided inner glass door for NB-203 models
203XL-ING 6 divided inner glass door for NB-203XL models
203-HOLE Access port
203-UV UV sterilisation.
203-HEPA HEPA filter
203-REG CO2 Regulator (Crown, Japan)
203-ANL Fyrite CO2 Analyser (Bacharach, USA)
203-O2 O2 Option
203-125 125ºC hot air sterilisation (without sensor disassembly) for NB-203
203XL-125 125ºC hot air sterilisation (without sensor disassembly) for NB-203XL, NB-203QS and NB-203QR
203-SH Shelf for NB-203 models
203XL-SH Shelf for NB-203XL models
203-110 Table for NB-203 models, height 200 mm
203-111 Table for NB-203XL models, height 200 mm
203-STAKIT Stacking kit for 2 x NB-203
203XL-STAKIT Stacking kit for 2 x NB-203XL
203-113 Humidity display (not control)
203-114 Roller base for NB-203XL, NB-203QS and NB-203QR
203QS-H10 16 x 100ml. flask holder with platform for NB-203QS
203QS-H25 9 x 250ml. flask holder with platform for NB-203QS
203QS-H50 5 x 500ml. flask holder with platform for NB-203QS
203QS-H100 4 x 1000ml. flask holder with platform for NB-203QS
203QS-SR Spring rack with platform
203-COP Copper chamber for NB-203
203XL-COP Copper chamber for NB-203XL

Please contact Progen Scientific for information on N-Biotek 650 litre AniCell model with 3 built-in orbital shakers