Hermle Z366 Unrefrigerated and Z366K Refrigerated Benchtop Centrifuges, 6 x 250ml

Zoom Out Zoom In

Hermle Z366 Unrefrigerated and Z366K Refrigerated Benchtop Centrifuges, 6 x 250ml

 

Be the first to review this product

Product is not available online. For more information on purchasing this item contact our sales office on the number below:

+44 020 8542 2283

or email scientific@zeal.co.uk

Additional Information

The universal Z366 benchtop centrifuge reaches new heights regarding the versatility, running features, easy handling and design.Both the tube capacity of up to 28 x 15 ml. Falcon tubes and centrifugal forces up to 29,068 x g. turns the Z366 into a universal, high powered centrifuge.

- Speed range: 200 - 20,000 rpm / 29,068 x g.
- Maintenance-free induction drive
- Quiet running: noise level < 60 dBA at maximum speed
- Microprocessor with large LCD display
- Motor driven lid lock
- Automatic rotor identification system with over speed protection (prevents rotors from running above their maximum rated speed)
- Active imbalance detection and cut-off
- Imbalance tolerant drive
- Audible signal at the end of each run
- Large variety of rotors and accessories
- Manufactured according to IEC 1010 and 1010-2 standard
- Distinct control panel:

- simple one handed operation
- easy to programme with gloves on
- splash-proof digital display
- permanent display of preset and actual values
- selection of speed in both rpm and g-force with
- increments of 10
- 10 acceleration and 10 deceleration rates with storage of up to 99 runs
- direct access to parameters; no need to click through programme
- pre-selection of running time from 10 seconds to 99h 59min or continuous
- quick key for short runs

- Dimensions: 430W x 510D x 380H mm.
- Weight: 52 Kg.
 
 
Ordering information: 
 
Ordering information: 
 
301.00 V03
Hermle Model Z366 Unrefrigerated  Centrifuge, Max. volume 6 x 250 ml. 
(fixed angle rotor), 4 x 250ml. (swing-out rotor)
301.00 P03
Package Deal: Hermle Z366 unrefrigerated centrifuge supplied with high
capacity 4 x 250ml rotor (221.61 V01), 4 buckets for total of 16 x 50ml Falcon 
tubes and 4 buckets for total of 40 x 15ml Falcon tubes.
319.00 V01
Hermle Model Z366K Refrierated Centrifuge, Max volume 6 x 250ml
(fixed angle rotor), 4 x 250ml (swing-out rotor)
319.00 P01
Package Deal: Hermle Z366K refrigerated centrifuge supplied with high 
capacity 4 x 250ml rotor (221.61 V01), 4 buckets for total of 16 x 50ml Falcon
tubes and 4 buckets for total of 40 x 15ml Falcon tubes.
Swing-out rotors:
NOTE: All adaptors are in pack of 2 unless stated otherwise
221.15 V02
4 x 250 ml. high capacity swing-out rotor,  max. speed 4500 rpm / 3780 x g. 
628.100
Screw-cap, polycarbonate for 628..... buckets (pack of 2)
628.101
Spare 0-rings for 628.100 screw-caps  (pack of 10)
628.000
Bucket 1 x 250ml., 62mm. dia. (pack of 2)
628.001
Bucket 1 x 100ml., 41mm. dia. (pack of 2)
628.002
Bucket 3 x 50ml., 29mm. dia. (pack of 2)
628.005
Bucket 3 x 50ml. Falcon, 29mm. dia. (pack of 2)
628.003
Bucket 5 x 25ml., 24.5mm. dia.  (pack of 2)
628.004
Bucket 9 x 15ml., 17mm. dia.  (pack of 2)
628.007
Bucket 7 x 15ml. Falcon, 17mm. dia. (pack of 2)
628.008
Bucket 1 x 50ml., 34mm. dia. (pack of 2)
628.009
Bucket 1 x 50ml., 29mm. dia. with rim (pack of 2)
628.010
Bucket 3 x 25ml., 24.5mm. dia. with rim (pack of 2)
628.011
Bucket 7 x 15ml., 17mm. dia. with rim (pack of 2)
628.012
Bucket 8 x 10ml., 16mm. dia. (pack of 2)
628.013
Bucket 14 x 5 – 7ml., 13mm. dia. (pack of 2)
628.014
Bucket 10 x 1.6 – 7ml. Vacutainer, 13mm. dia. (pack of 2)
628.015
Bucket 8 x 4 – 10ml. Vacutainer, 16mm. dia. (pack of 2)
628.016
Bucket 9 x 1.5/2.0ml., 11 mm. dia. (pack of 2)
221.16 V01
Swing-out rotor, 4 places with 4 buckets to hold 4 x 50ml Falcon tubes
each and 4 buckets to hold 10 x 15ml Falcon tubes each. Max speed
4,500 rpm (3,894 x g) for Z446 and 5,000 rpm (4,807 x g) for Z446K.
630.000
Bucket 4 x 50ml Falcon, 29mm dia (pack of 2)
630.001
Bucket 10 x 15ml Falcon , 17mm dia (pack of 2)
221.16 V03
Microtitre plate rotor with 2 carriers,  max. speed 4500 rpm / 2720 x g. 
max. loading height 58 mm.; max. load 310 g.
607.000
Replacement carrier for rotor 221.16 V03
706.000
Adaptor 48 x 1.5/2.0ml. 
41-5215
Vaseline for swing-out rotors, 10ml tube
Fixed angle rotors:
NOTE: All adaptors are in pack of 2 unless stated otherwise
221.21 V02
Angle rotor for 6 x 250 ml. tubes max. speed 8,000 rpm / 10,017 x g.
713.015
Adaptor, 8 x 15ml., 11mm. dia., 40mm. length 
713.020
Adaptor, 5 x 10ml., 16mm. dia., 80mm. length 
713.025
Adaptor, 4 x 15m (Falcon)., 17mm. dia., 120mm. length
713.028
Adaptor, 2 x 30ml., 26mm. dia., 92mm. length 
713.030
Adaptor, 1 x 50ml., 29mm. dia., 103mm. length  
713.042
Adaptor, 1 x 50ml (Falcon)., 30mm. dia., 115mm. length
221.18 V02
Angle rotor for 6 x 80 ml. tubes max. speed 11,000 rpm / 15,556 x g.
707.000
Adaptor, 2 x 15ml, 17mm dia
707.001
Adaptor, 1 x 15ml., 17mm. dia.
707.002
Adaptor, 1 x 30ml., 25mm. dia.
707.003
Adaptor, 1 x 50ml., 29mm. dia.
707.004
Adaptor, 1 x 50ml. Falcon, 29mm. dia.
707.014
Adaptor, 1 x 15ml. Falcon, 17mm. dia.
221.20 V02
Angle rotor for 4 x 80 ml. tubes max. speed 12,000 rpm / 14,811 x g.
707.000
Adaptor, 2 x 15ml, 17mm dia
707.001
Adaptor, 1 x 15ml., 17mm. dia.
707.002
Adaptor, 1 x 30ml., 25mm. dia.
707.003
Adaptor, 1 x 50ml., 29mm. dia.
707.004
Adaptor, 1 x 50ml. Falcon, 29mm. dia.
707.014
Adaptor, 1 x 15ml. Falcon, 17mm. dia.
221.52 V02
Angle rotor 10 x 50ml (38 degrees angle), for 50ml Falcon tubes 
only; max speed 9,500rpm (13,115 x g) - with lid.
708.030
Adaptor, 1 x 15ml Falcon/Round Bottom, 17mm dia, 97/121mm min length;
123/121 max length max, RCF: 4,346/4,225 x g
701.011
Adaptor, 1 x 7ml, 13.5mm dia, 95/115mm length
701.012
Adaptor, 1 x 5ml (RIA), 13.5mm dia, 70/90mm length
701.015
Adaptor, 1 x 1.5ml, 11mm dia, 42mm length (pack of 6)
221.22 V02
Angle rotor for 6 x 50 ml. tubes max. speed 13,000 rpm / 15,871 x g.
708.019
Adaptor, 1 x 30ml., 25mm. dia.
708.003
Adaptor, 1 x 16ml., 18mm. dia.
708.004
Adaptor, 1 x 15ml., 17mm. dia.
708.017
Adaptor, 1 x 15ml. Falcon, 17mm. dia.
221.19 V02
Angle rotor for 30 x 15 ml. Falcon tubes max. speed 4500 rpm / 2830 x g.
701.011
Adaptor, 1 x 7ml., 13.5mm. dia., 95/115mm. min./max. length
701.012
Adaptor, 1 x 5ml (RIA)., 13.5mm. dia., 70/90mm min./max. length
701.015
Adaptor,  1 x 1.5ml., 11mm. dia., 42mm. length (pack of 6)
221.28 V02
Angle rotor for 20 x 10 ml. Falcon tubes max. speed 12,000 rpm /15,777 x g.
220.87 V09
Angle rotor for 24 x 1.5 / 2.0 ml. microtubes max. speed 15,000 rpm / 23,645 x g.
for Z366, 16,000rpm, 24,321 x g for Z366K 
704.004
Adaptor set for 0.2/0.4ml. (pack of 6)
704.005
Adaptor set for 0.5ml. (pack of 6)
220.87 V10
Angle rotor for 24 x 1.5 / 2.0 ml. microtubes,, sealable
max. speed 15,000 rpm / 23,645 x g. for Z366, 16,000rpm /24,321 x g for Z366K
704.004
Adaptor set for 0.2/0.4ml. (pack of 6)
704.005
Adaptor set for 0.5ml. (pack of 6)