Hermle Z326 Benchtop Unrefrigerated and Z326K Refrigerated Benchtop Centrifuge, 4 x 100ml.

Zoom Out Zoom In

Hermle Z326 Benchtop Unrefrigerated and Z326K Refrigerated Benchtop Centrifuge, 4 x 100ml.

 

Be the first to review this product

Product is not available online. For more information on purchasing this item contact our sales office on the number below:


+44 020 8542 2283


or email scientific@zeal.co.uk

Additional Information

- Speed range: 200 – 18,000 rpm in 10 rpm increments
- Max. RCF: 23,545 x g.
- Max. volume: 4 x 100 ml.
- Temperature range: -20°C to +40°C in 1°C increments (model Z326K only)
- Standstill cooling (model Z326K only)
- Running time: from 30 seconds to 99 h. 59 min. or continuous
- Digital display of preset and actual speed / RCF and time
- Maintenance-free induction motor
- Motor driven lid lock
- Automatic rotor identification system with overspeed protection
- Active imbalance identification with safety cut-off
- Imbalance tolerant drive
- Quick key for short runs with corresponding digital display of elapsed time in seconds
- Audible signal at the end of each run with several melody options
- Noise level under 60 dBA at max. speed
- Dimensions: Z326 - 400W x 360H x 480D mm. ; Z326K - 400W x 360H x 700D mm.
- Weight: Z326 - 43 Kg.; Z326K – 60 Kg.
- Distinct control panel (microprocessor with large LCD display):

- Simple one handed operation
- Easy to programme with gloves on
- Splash proof digital display
- Permanent indication of Preset and Actual Values
- Selection of speed in both rpm and g-force, with increments of 10
- 10 acceleration and deceleration rates, possibility of unbraked deceleration
- Direct access to parameters; no need to click through the programme
- Temperature selec tion available in both ºC and ºF
- Pre-selection of the running time from 10 sec. to 99 h 59 min or continuous
- Pre-cooling programme option
- Standstill cooling runs including rotor type
- Quick key for short runs
- Diagnostic programme

Ordering information:

Ordering information:  
312.00 V01
Hermle Model Z326 unrefrigerated benchtop centrifuge 
311.00 V01 Hermle Model Z326K refrigerated benchtop centrifuge
Swing-out rotors: NOTE: All adaptors are in pack of 2 unless stated otherwise 
221.12 V03 4 x 100 ml. swing-out rotor (0 – 90 degrees angle); max. speed 4500 rpm. (3350 x g.) 
626.000 Bucket 1 x 100ml., 44mm. dia., 90/108mm. length (pack of 2)
626.001 Bucket 1 x 85ml., 38mm. dia., 90/108mm. length (pack of 2)
626.008
Bucket 1 x 50ml., 34mm. dia., 92/118mm. length (pack of 2)
626.009 Bucket 1 x 50ml., 29mm. dia., 90/133mm. length (pack of 2)
626.002 Bucket 1 x 50ml. (Falcon), 29mm. dia., 116mm. length (pack of 2)
626.010
Bucket 1 x 50ml. with rim, 29mm. dia., 116mm. length (pack of 2)
626.011 Bucket 1 x 30ml., 25mm. dia., 95/105mm. length (pack of 2)
626.012
Bucket 1 x 25ml., 25mm. dia., 95/110mm. length (pack of 2)
626.003 Bucket 2 x 15ml. (Falcon), 17mm. dia., 120mm. length (pack of 2)
626.013
Bucket 2 x 15ml. with rim, 17mm. dia., 120mm. length (pack of 2)
626.004 Bucket 7 x 15ml., 17mm. dia., 90/108mm. length (pack of 2)
626.005 Bucket 9 x 5-7ml., 13mm. dia., 75/100mm. length (pack of 2)
626.014 Bucket 10 x 1.5ml., 11mm. dia., 42mm. length (pack of 2)
626.007
Bucket 9 x 4.5ml., 12mm. dia., 75/100mm. length (pack of 2)
626.015 Bucket 9 x 5-7ml., 13mm. dia., 65/80mm. length (pack of 2)
626.006 Bucket 7 x 5-7ml. Vacutainer, 13mm. dia., 75/100mm. length (pack of 2)
220.72 V06
4 x 100 ml. swing-out rotor (0 – 90 degrees angle); max. speed 5000 rpm. (3885 x g.) 
605.000
Round bucket for rotor 220.72 V06 and for adaptors 705.00, etc (pack of 2)
605.001 Round bucket, hermetically sealed with see-through screw-cap made of PC for
rotor 220.72 V06 and for  adaptors 705.000, etc. (pack of 2) 
605.002 
Screw-cap made of PC for bucket 605.000 and 605.001 (pack of 2)
605.003 O-ring for buckets 605.000 and 605.001 (pack of 10) 
705.000  Tube rack 1 x 100ml., 40mm. dia., 90/108mm. length (pack of 2) 
705.012
Tube rack 1 x 85ml. , 38mm. dia., 90/108mm. length (pack of 2)
705.001  Tube rack 1 x 50ml., 34mm. dia., 92/118mm. length (pack of 2) 
705.010 Tube rack 1 x 50ml., 29mm. dia., 90/133mm. length (pack of 2) 
705.006  Tube rack 1 x 50ml. (Falcon), 29mm. dia., 116mm. length (pack of 2) 
705.013  Tube rack 1 x 50ml. with rim, 29mm. dia., 116mm. length (pack of 2)
705.014  Tube rack 1 x 30ml., 25mm. dia., 75/105mm. length (pack of 2) 
705.002
Tube rack 1 x 25ml., 25mm. dia., 95/110mm. length (pack of 2)
705.018  Tube rack 1 x 15ml. (Falcon), 17mm. dia., 120 mm. length (pack of 2)
705.005
Tube rack 2 x 15ml. (Falcon), 17mm. dia., 120mm. length (pack of 2)
705.015 Tube rack 2 x 15ml. with rim, 17mm. dia., 120mm. length (pack of 2) 
705.003 Tube rack 4 x 15ml., 17mm. dia., 90/108mm. length (pack of 2) 
705.007  Tube rack 7 x 5-7ml., 13mm. dia., 75/100mm. length (pack of 2)
705.009  Tube rack 5 x 1.5ml., 11mm. dia., 42mm. length (pack of 2) 
705.011  Tube rack 3 x 10ml. Sarstedt, 17mm. dia., 85/100mm. length (pack of 2) 
705.008  Tube rack 4 x 5-7ml., 13mm. dia., 75/100mm. length (pack of 2) 
705.016  Tube rack 4 x 10ml. Vacutainer, 17mm. dia., 75/100mm. length (pack of 2)
605.004 
Round bucket for rotor 220.72 V06 for 2 x 50ml. Falcon tubes with 29mm. dia., 116mm. length (pack of 2) 
Can only be used without bucket lid
605.005  Round bucket for rotor 220.72 V06 for 3 x 15ml. Falcon tubes with 17mm. dia., 120mm. length (pack of 2)
Can only be used without bucket lid
605.010  Rectangular bucket for Cyto-System (4000 rpm. / 1305 x g.)  
26.5062 Carrier for cyto-container (pack of 1). 4 units required 
45.5064
Cyto-container with 2 cylindrical bore holes, 1.5ml. (pack of 1)
45.5065  Cyto-container with 2 conical bore holes, 3ml. (pack of 1) 
23.5103  Spare cover for cyto-container (pack of 1) 
25.5085 Filter cards for cylindrical container (pack of 100)
25.5086 Filter cards for conical container (pack of 100)
221.16 V03 Swing-out rotor with 2 x 3 microtitre plates carriers, (0 – 90 degree angle), max. speed 4500 rpm (2739 x g.) 
607.000 Replacement carrier for rotor 221.16 V03 (pack of 2) 
706.000  Adaptor 48 x 1.5/2.0ml. (pack of 2) 
41-5215 Vaseline for swing-out rotors,10ml tube
Fixed angle rotors:  NOTE: All adaptors are in pack of 2 unless stated otherwise 
220.78 V05 6 x 85 ml. angle rotor ( 25 degrees angle);  max. speed 11,000 rpm. (13,933 x g.) – with lid 
707.000
Adaptor, 2 x 15ml., 17mm. dia., 95/100mm. length
707.001
Adaptor, 1 x 15ml., 17mm. dia., 103/110mm. length
707.014
Adaptor, 1 x 15ml (Falcon)., 17mm. dia., 120mm. length
707.015
Adaptor, 1 x 16ml., 18mm. dia., 103/110mm. length
707.002
Adaptor, 1 x 30ml., 25mm. dia., 93/103mm. length
707.003
Adaptor, 1 x 50ml., 29mm. dia., 105mm. length
707.004
Adaptor, 1 x 50ml. (Falcon)., 29mm. dia., 118mm. length
221.18 V02
6 x 85 ml. angle rotor ( 38 degrees angle); max. speed 9,000 rpm. (10,414 x g.) – with lid
707.000
Adaptor, 2 x 15ml., 17mm. dia., 95/100mm. length
707.001
Adaptor, 1 x 15ml., 17mm. dia., 103/110mm. length
707.014
Adaptor, 1 x 15ml (Falcon)., 17mm. dia., 120mm. length
707.015
Adaptor, 1 x 16ml., 18mm. dia., 103/110mm. length
707.002
Adaptor, 1 x 30ml., 25mm. dia., 93/103mm. length
707.003
Adaptor, 1 x 50ml., 29mm. dia., 105mm. length
707.004
Adaptor, 1 x 50ml. (Falcon)., 29mm. dia., 118mm. length
221.20 V02 4 x 85 ml. angle rotor ( 30 degrees angle); max. speed 12,000 rpm. (14,811 x g.) – with lid
708.030 Adaptor 1 x 15ml Falcon/round bottom, 17mm dia, 97/121mm min length, 123/121 max length
707.000
Adaptor, 2 x 15ml., 17mm. dia., 95/100mm. length
707.001
Adaptor, 1 x 15ml., 17mm. dia., 103/110mm. length
707.014
Adaptor, 1 x 15ml (Falcon)., 17mm. dia., 120mm. length *
707.015
Adaptor, 1 x 16ml., 18mm. dia., 103/110mm. length
707.002
Adaptor, 1 x 30ml., 25mm. dia., 93/103mm. length
707.003
Adaptor, 1 x 50ml., 29mm. dia., 105mm. length
707.004
Adaptor, 1 x 50ml. (Falcon)., 29mm. dia., 118mm. length *
 
* Falcon tubes can only be used without the rotor lid!
221.52 V02
10 x 50ml angle rotor (38 degrees angle), for 50ml Falcon tubes only; max speed 7,500rpm, (8,170 x g)-with lid
708.030
Adaptor, 1 x 15ml, Falcon/round bottom, 17mm dia, 97/121mm min length, 123/121 max length, max RCF:4,346/4225 x g
 701.011
Adaptor, 1 x 7ml, 13.5mm dia, 95/115mm length
701.012
Adaptor, 1 x 5ml (RIA), 13.5mm dia, 70/90mm length
701.015
Adaptor, 1 x 1.5ml, 11mm dia, 42mm length
221.22 V02
6 x 50 ml. angle rotor (26 degrees angle); max. speed 12,000 rpm. (13,523 x g.) – with lid
708.019
Adaptor, 1 x 30ml., 25mm. dia., 92/95mm. length
708.003
Adaptor, 1 x 16ml., 18mm. dia., 100/105mm. length
708.004
Adaptor, 1 x 15ml., 17mm. dia., 100/105mm. length
708.017
Adaptor, 1 x 15ml. (Falcon), 17.5mm. dia., 116/125mm. length *
 
* Falcon tubes can only be used without the rotor lid! 
221.28 V02
20 x 10ml. angle rotor (30 degrees angle);  max. speed 12,000 rpm. (15,938 x g.) – with lid
221.17 V03
30 x 1.5/2.0ml. angle rotor (45 degrees angle); hermetically sealable; max. speed 13,000 rpm. (17,760 x g.) – with lid 
704.004
Adaptor set for 0.2/0.4ml., 6mm. dia., 45mm. length (pack of 6) 
704.005
Adaptor set for 0.5ml., 8mm. dia., 45mm. length (pack of 6)
220.87 V10
24 x 1.5/2.0ml. angle rotor (45 degrees angle); hermetically sealable; max. speed 14,000 rpm. (18,625 x g.) – with lid
704.004
Adaptor set for 0.2/0.4ml., 6mm. dia., 45mm. length (pack of 6)
704.005
Adaptor set for 0.5ml., 8mm. dia., 45mm. length (pack of 6)
220.87 V09
24 x 1.5/2.0ml. angle rotor (45 degrees angle); max. speed 14,000 rpm. (18,625 x g.) – with lid
704.004
Adaptor set for 0.2/0.4ml., 6mm. dia., 45mm. length (pack of 6)
704.005
Adaptor set for 0.5ml., 8mm. dia., 45mm. length (pack of 6)
220.88 V09
44 x 1.5/2.0ml. angle rotor (40 degrees angle); max. speed 13,500 rpm. (17,115 / 14,466 x g.) – with lid
704.004
Adaptor set for 0.2/0.4ml., 6mm. dia., 45mm. length (pack of 6)
704.005
Adaptor set for 0.5ml., 8mm. dia., 45mm. length (pack of 6)
221.23 V02
12 x 1.5/2.0ml. angle rotor (40 degrees angle); max. speed 18,000 rpm. (23,545 x g.) – with lid
704.004
Adaptor set for 0.2/0.4ml., 6mm. dia., 45mm. length (pack of 6)
704.005
Adaptor set for 0.5ml., 8mm. dia., 45mm. length (pack of 6)
704.011
Adaptor, 1 x 1.5ml (necessary from 16000 x g and higher) (pack of 6)
220.92 V06
64 x 0.4 ml. angle rotor (40 degrees angle); max. speed 13,500 rpm. (16,708/14,059 x g.) – with lid
221.38 V01
4 x 8 place PCR strips angle rotor (45 degree angle); max. speed 15,000 rpm., (15,344 x g.) – with lid
221.19 V02
30 x 15 ml. angle rotor (35 degrees angle); max. speed 4,500 rpm. (2829/2467 x g.) – no rotor lid
701.011
Adaptor, 1 x 7ml., 13.5mm. dia., 95/115mm. length (pack of 2)
701.012
Adaptor, 1 x 5ml. (RIA), 13.5m. dia.,70/90mm. length (pack of 2)
701.015
Adaptor, 1 x 1.5ml., 11mm. dia., 42mm. length (pack of 6) 
221.54 V02
12 x 15ml. round bottom or Falcon tubes, 17 mm. dia., angle rotor (35 degrees angle); max. speed 6,000 rpm. (4,427 x g.) 
701.011
Adaptor, 1 x 7ml., 13.5mm. dia., 95/115mm. length (pack of 2)
701.012
 Adaptor, 1 x 5ml. (RIA), 13.5m. dia.,70/90mm. length (pack of 2)
701.015
Adaptor, 1 x 1.5ml., 11mm. dia., 42mm. length (pack of 6)
221.55 V02
6 x 50ml. round bottom or Falcon tubes, 30 mm. dia. angle rotor (40 degree angle); max. speed 6,000 rpm. (4,427 x g.)
708.019
Tube rack, 1 x 30ml., 25mm. dia., 92/95mm. length (pack of 2)
708.003 Tube rack, 1 x 16ml., 18mm. dia., 100/105mm. length (pack of 2)
708.004
Tube rack, 1 x 15ml., 17m. dia.,100/105mm. length (pack of 2)
708.030
Adaptor for 15ml. round bottom or Falcon tubes, 17 mm. dia., min. / max. length: 110-116 / 125-133 mm.  (4105 / 4185 x g.)
701.011
Adaptor, 1 x 7ml., 13.5mm. dia., 95/115mm. length (pack of 2)
701.012
Adaptor, 1 x 5ml. (RIA), 13.5m. dia.,70/90mm. length (pack of 2)
701.015
Adaptor, 1 x 1.5ml., 11mm. dia, 42mm. length (pack of 6)